NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 295

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
assign-queue
This command modifies the queue id to which the associated traffic stream is assigned. The
queueid is an integer from 0 to n-1, where n is the number of egress queues supported by the
device.
Format
assign-queue <queueid>
Mode Policy-Class-Map Config
Incompatibilities Drop
drop
This command specifies that all packets for the associated traffic stream are to be dropped at
ingress.
Format
drop
Mode Policy-Class-Map Config
Incompatibilities Assign Queue, Mark (all forms), Mirror, Police, Redirect
mirror
This command specifies that all incoming packets for the associated traffic stream are copied to a
specific egress interface (physical port or LAG).
Format
mirror <unit/slot/port>
Mode Policy-Class-Map Config
Incompatibilities Drop, Redirect
redirect
This command specifies that all incoming packets for the associated traffic stream are redirected to
a specific egress interface (physical port or port-channel).
Format
redirect <unit/slot/port>
Mode Policy-Class-Map Config
Incompatibilities Drop, Mirror
Quality of Service (QoS) Commands
v1.0, November 2010
5-21