System Utility And Clear Commands - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Term Definition
Number of Traps The number of traps since the last boot.
Since Last Reset
Trap Log The number of traps the system can retain.
Capacity
Number of Traps The number of new traps since the command was last executed.
Since Log Last
Viewed
Log The log number.
System Time Up How long the system had been running at the time the trap was sent.
Trap The text of the trap message.
logging persistent
Use this command to configure the Persistent logging for the switch. The severity level of logging
messages is specified at severity level. Possible values for severity level are (emergency|0,
alert|1, critical|2, error|3, warning|4, notice|5, info|6,
debug|7).
Default Disable
Format
logging persistent <severity level>
Mode Global Config
no logging persistent
Use this command to disable the persistent logging in the switch.
Format
no logging persistent
Mode Global Config

System Utility and Clear Commands

This section describes the commands you use to help troubleshoot connectivity issues and to
restore various configurations to their factory defaults.
Utility Commands
v1.0, November 2010
6-23