NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 512

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Table 8-25: 802.3ad Log Messages
Component Message
802.3ad dot3adNimEventCompletionCallback,
dot3adNimEventCreateCompletionCallback:
DOT3AD: notification failed for event(%d),
intf(%d), reason(%d)
Table 8-26: FDB Log Message
Component Message
FDB fdbSetAddressAgingTimeOut: Failure
setting fid %d address aging timeout to %d
Table 8-27: Double VLAN Tag Log Message
Component Message
Double Vlan Tag dvlantagIntfIsConfigurable: Error accessing
dvlantag config data for interface %d
Table 8-28: IPv6 Provisioning Log Message
Component Message
IPV6 ipv6ProvIntfIsConfigurable: Error accessing
Provisioning
IPv6 Provisioning config data for interface
%d
Table 8-29: MFDB Log Message
Component Message
MFDB mfdbTreeEntryUpdate: entry does not exist Trying to update a non existing entry
Log Messages
Cause
The event sent to NIM was not completed
successfully
Cause
Unable to set the age time in the hardware
Cause
A default configuration does not exist for this
interface. Typically a case when a new
interface is created and has no pre-
configuration.
Cause
A default configuration does not exist for this
interface. Typically a case when a new
interface is created and has no pre-
configuration.
Cause
v1.0, November 2010
8-14