NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 240
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no isdp enable
This command disables ISDP on the interface.
Format
no isdp enable
Mode
Interface Config
clear isdp counters
This command clears ISDP counters.
Format
clear isdp counters
Mode
Privileged EXEC
clear isdp table
This command clears entries in the ISDP table.
Format
clear isdp table
Mode
Privileged EXEC
show isdp
This command displays global ISDP settings.
Format
show isdp
Mode
Privileged EXEC
Term
Definition
Timer
The frequency with which this device sends ISDP packets. This value is given in
seconds.
Hold Time
The length of time the receiving device should save information sent by this device. This
value is given in seconds.
Version 2
The setting for sending ISDPv2 packets. If disabled, version 1 packets are transmitted.
Advertisements
Switching Commands
v1.0, November 2010
3-199
Advertisement
Table of Contents
