Show Captive-Portal Configuration Client Status - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Term Definition
Verification The user verification mode
Example
(switch)
#show captive-portal interface client status
Client Client
Intf Intf Description
------ -----------------------------------
--------------
1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit
1/0/2 Unit: 1 Slot: 0 Port: 2 Gigabit
1/0/3 Unit: 1 Slot: 0 Port: 3 Gigabit
(switch)
#show captive-portal interface 1/0/1 client status
Interface................................. 1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigabit
Client Client
MAC Address
-----------------
-- ------------
0002.BC00.1290 10.254.96.47
0002.BC00.1291 10.254.96.48

show captive-portal configuration client status

Use this command to display the clients authenticated to all captive portal configurations or a to
specific configuration. <1-10> is the captive portal ID.
Format
show captive-portal configuration [ <1-10> ] client status
Mode Privileged EXEC mode
Term Definition
CP ID The captive portal ID
CP Name The captive portal name
Client MAC The MAC address of the client associated with the captive portal instance.
Address
Client IP Address The IP address of the client associated with the captive portal instance
Interface The interface on which the client is authenticated.
Captive Portal Commands
IP Address CP ID
---------------
1
2
v1.0, November 2010
MAC Address
-----------------
0002.BC00.1290
0002.BC00.1292
0002.BC00.1293
CP Name Protocol
----- --------------
cp1 http
cp2 http
IP Address
-
10.254.96.47
10.254.96.49
10.254.96.50
Verification
------
local
local
9-22