NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 194

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no set igmp querier query-interval
Use this command to set the IGMP Querier Query Interval time to its default value.
Format
no set igmp querier query-interval
Mode Global Config
set igmp querier timer expiry
Use this command to set the IGMP Querier timer expiration period. It is the time period that the
switch remains in Non-Querier mode once it has discovered that there is a Multicast Querier in the
network.
Default 60 seconds
Format
set igmp querier timer expiry <60-300>
Mode Global Config
no set igmp querier timer expiry
Use this command to set the IGMP Querier timer expiration period to its default value.
Format
no set igmp querier timer expiry
Mode Global Config
set igmp querier version
Use this command to set the IGMP version of the query that the snooping switch is going to send
periodically.
Default 1
Format
set igmp querier version <1-2>
Mode Global Config
Switching Commands
v1.0, November 2010
3-153