NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 467
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
snmp-server enable traps violation
This command enables the sending of new violation traps designating when a packet with a
disallowed MAC address is received on a locked port.
Note: For other port security commands, see
Default
disabled
Format
snmp-server enable traps violation
Mode
Interface Config
no snmp-server enable traps violation
This command disables the sending of new violation traps.
Format
no snmp-server enable traps violation
Mode
Interface Config
snmp-server enable traps
This command enables the Authentication Flag.
Default
enabled
Format
snmp-server enable traps
Mode
Global Config
no snmp-server enable traps
This command disables the Authentication Flag.
Format
no snmp-server enable traps
Mode
Global Config
Management Commands
"Protected Ports Commands" on page
v1.0, November 2010
3-53.
7-51
Advertisement
Table of Contents
