NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 354
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
1 packets transmitted,0 packets received, 100% packet loss
round-trip (msec) min/avg/max = 0/0/0
quit
This command closes the current telnet connection or resets the current serial connection. The
system asks you whether to save configuration changes before quitting.
Format
quit
Modes
• Privileged EXEC
• User EXEC
reload
This command resets the switch without powering it off. Reset means that all network connections
are terminated and the boot code executes. The switch uses the stored configuration to initialize
the switch. You are prompted to confirm that the reset should proceed. The LEDs on the switch
indicate a successful reset.
Format
reload
Mode
Privileged EXEC
save
This command makes the current configuration changes permanent by writing the configuration
changes to system NVRAM.
Format
save
Mode
Privileged EXEC
Utility Commands
v1.0, November 2010
6-30
Advertisement
Table of Contents
