Show Auto-Voip - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Format
no auto-voip all
Mode
Global Config
auto-voip
Use this command to enable VoIP Profile on the interface.
Default
disabled
Format
auto-voip
Mode
Interface Config
no auto-voip
Use this command to disable VoIP Profile on the interface.
Format
no auto-voip all
Mode
Interface Config
show auto-voip
Use this command to display the VoIP Profile settings on the interface or interfaces of the switch.
Format
show auto-voip interface {<unit/slot/port>|all}
Mode
Privileged EXEC
Field
Description
AutoVoIP Mode The Auto VoIP mode on the interface.
Traffic Class
The CoS Queue or Traffic Class to which all VoIP traffic is mapped to. This is not
configurable and defaults to the highest CoS queue available in the system for data traffic.
Quality of Service (QoS) Commands
v1.0, November 2010
5-50
Advertisement
Table of Contents
