NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 380

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no ip domain list
Use this command to delete a name from a list.
Format
no ip domain list <name>
Mode Global Config
ip name server
Use this command to configure the available name servers. Up to eight servers can be defined in
one command or by using multiple commands. The parameter <server-address> is a valid
IPv4 or IPv6 address of the server. The preference of the servers is determined by the order they
were entered.
Format
ip name-server <server-address1> [server-address2...server-address8]
Mode Global Config
no ip name server
Use this command to remove a name server.
Format
no ip name-server [server-address1...server-address8]
Mode Global Config
ip host
Use this command to define static host name-to-address mapping in the host cache. <name> is
host name. <ip address> is the IP address of the host.
Default none
Format
ip host <name> <ipaddress>
Mode Global Config
Utility Commands
v1.0, November 2010
6-56