NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 225
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
dos-control all
This command enables Denial of Service protection checks globally.
Default
disabled
Format
dos-control all
Mode
Global Config
no dos-control all
This command disables Denial of Service prevention checks globally.
Format
no dos-control all
Mode
Global Config
dos-control sipdip
This command enables Source IP address = Destination IP address (SIP=DIP) Denial of Service
protection. If the mode is enabled, Denial of Service prevention is active for this type of attack. If
packets ingress with SIP=DIP, the packets will be dropped if the mode is enabled.
Default
disabled
Format
dos-control sipdip
Mode
Global Config
no dos-control sipdip
This command disables Source IP address = Destination IP address (SIP=DIP) Denial of Service
prevention.
Format
no dos-control sipdip
Mode
Global Config
Switching Commands
v1.0, November 2010
3-184
Advertisement
Table of Contents
