NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 503

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Table 8-7: RADIUS Log Messages
Component Message
RADIUS RADIUS: Invalid data length - xxx
RADIUS RADIUS: Failed to send the request
RADIUS RADIUS: Failed to send all of the request
RADIUS RADIUS: Could not get the Task Sync
semaphore!
RADIUS RADIUS: Buffer is too small for response
processing
RADIUS RADIUS: Could not allocate accounting
requestInfo
RADIUS RADIUS: Could not allocate requestInfo
RADIUS RADIUS: osapiSocketRecvFrom returned
error
RADIUS RADIUS: Accounting-Response failed to
validate, id=xxx
RADIUS RADIUS: User (xxx) needs to respond for
challenge
RADIUS RADIUS: Could not allocate a buffer for the
packet
RADIUS RADIUS: Access-Challenge failed to
validate, id=xxx
RADIUS RADIUS: Failed to validate Message-
Authenticator, id=xxx
RADIUS RADIUS: Access-Accpet failed to validate,
id=xxx
RADIUS RADIUS: Invalid packet length – xxx
RADIUS RADIUS: Response is missing Message-
Authenticator, id=xxx
RADIUS RADIUS: Server address doesn't match
configured server
Log Messages
Cause
The RADIUS Client received an invalid
message from the server.
A problem communicating with the RADIUS
server.
A problem communicating with the RADIUS
server during transmit.
Resource issue with RADIUS Client service.
RADIUS Client attempted to build a
response larger than resources allow.
Resource issue with RADIUS Client service.
Resource issue with RADIUS Client service.
Error while attempting to read data from the
RADIUS server.
The RADIUS Client received an invalid
message from the server.
An unexpected challenge was received for a
configured user.
Resource issue with RADIUS Client service.
The RADIUS Client received an invalid
message from the server.
The RADIUS Client received an invalid
message from the server.
The RADIUS Client received an invalid
message from the server.
The RADIUS Client received an invalid
message from the server.
The RADIUS Client received an invalid
message from the server.
RADIUS Client received a server response
from an unconfigured server.
v1.0, November 2010
8-5