Captive Portal Local User Commands; User Password - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

Format
show captive-portal interface configuration [ <1-10>] status
Mode Privileged EXEC mode
Term Definition
CP ID The captive portal ID
CP Name The captive portal name
Interface The interface associated with the CP ID.
Interface The description of the interface
Description
Type The type of the interface
Example
(switch)#show captive-portal interface configuration status
CP ID CP Name
----- ------------
1 Default
(switch)
#show captive-portal interface configuration 1 status
CP ID..................................... 1
CP Name................................... cp1
Interface Interface Description
--------- --------------------------------- --------
1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit

Captive Portal Local User Commands

The following section describes captive portal local user commands.

user password

Use this command to create a local user or change the password for an existing user. The user-id is
user ID in the range of 1-128. The password is the user passord in the range of 8-64 characters.
You can also enter encrypted password using the parameter encrypted.
Captive Portal Commands
Interface Interface Description
--------- ----------------------------
1/0/1
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
Unit: 1 Slot: 0 Port: 1 Gigabit
Type
Physical
Type
--------
Physical
9-24