NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 165

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no ip dhcp snooping vlan
Use this command to disable DHCP Snooping on VLANs.
Format
no ip dhcp snooping vlan <vlan-list>
Mode Global Config
ip dhcp snooping verify mac-address
Use this command to enable verification of the source MAC address with the client hardware
address in the received DCHP message.
Default enabled
Format
ip dhcp snooping verify mac-address
Mode Global Config
no ip dhcp snooping verify mac-address
Use this command to disable verification of the source MAC address with the client hardware
address.
Format
no ip dhcp snooping verify mac-address
Mode Global Config
ip dhcp snooping database
Use this command to configure the persistent location of the DHCP Snooping database. This can
be local or a remote file on a given IP machine.
Default local
Format
ip dhcp snooping database {local|tftp://hostIP/filename}
Mode Global Config
Switching Commands
v1.0, November 2010
3-124