ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no passwords strength-check
Use this command to disable the password strength-check.
Format
no passwords strength-check
Mode
Global Config
passwords strength minimum uppercase-letters
Use this command to enforce a minimum number of uppercase letters that a password should
contain. The valid range is 0-16. The default is 2. Minimum of 0 means no restriction on that set of
characters.
Format
passwords strength minimum uppercase-letters
Mode
Global Config
Default
2
no passwords strength minimum uppercase-letters
Use this command to reset the minimum number of uppercase letters to the default value.
Format
no passwords strength minimum uppercase-characters
Mode
Global Config
passwords strength minimum lowercase-letters
Use this command to enforce a minimum number of lowercase letters that a password should
contain. The valid range is 0-16. The default is 2. Minimum of 0 means no restriction on that set of
characters.
Format
passwords strength minimum lowercase-letters
Mode
Global Config
Default
2
Management Commands
v1.0, November 2010
7-37