Set Igmp Mcrtrexpiretime - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Format
set igmp maxresponse <1-25>
Mode • Global Config
• Interface Config
Format
set igmp maxresponse <vlan_id> <1-25>
Mode VLAN Config
no set igmp maxresponse
This command sets the max response time (on the interface or VLAN) to the default value.
Format
no set igmp maxresponse
Mode • Global Config
• Interface Config
Format
no set igmp maxresponse <vlan_id>
Mode VLAN Config

set igmp mcrtrexpiretime

This command sets the Multicast Router Present Expiration time. The time is set for the system, on
a particular interface or VLAN. This is the amount of time in seconds that a switch waits for a
query to be received on an interface before the interface is removed from the list of interfaces with
multicast routers attached. The range is 0 to 3600 seconds. A value of 0 indicates an infinite time-
out, i.e. no expiration.
Default 0
Format
set igmp mcrtrexpiretime <0-3600>
Mode • Global Config
• Interface Config
Format
set igmp mcrtrexpiretime <vlan_id> <0-3600>
Mode VLAN Config
Switching Commands
v1.0, November 2010
3-146