Non-Stop Forwarding Commands - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Term Definition
Tx Total Error Platform-specific number of total transmit errors since power-up.
Rx Data Rate Receive data rate in megabits per second on the stacking port.
Rx Error Rate Platform-specific number of receive errors per second.
Rx Total Errors Platform-specific number of total receive errors since power-up.
show stack-port diag
This command shows front panel stacking diagnostics for each port and is only intended for Field
Application Engineers (FAEs) and developers. An FAE will advise on the necessity to run this
command and capture this information.
Format
show stack-port diag
Mode Privileged EXEC
Term
Unit
Interface
Diagnostic Entry1
Diagnostic Entry2
Diagnostic Entry3

Non-Stop Forwarding Commands

Non-stop forwarding allows the stack units to continue to forward packets if the stack management
unit restarts because of a power failure, hardware failure, or software fault.
Stacking Commands
Definition
The unit number.
The slot and port numbers.
80 character string used for diagnostics.
80 character string used for diagnostics.
80 character string used for diagnostics.
v1.0, November 2010
2-12