NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 76
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
vlan name
This command changes the name of a VLAN. The name is an alphanumeric string of up to 32
characters, and the ID is a valid VLAN identification number. ID range is 1-4093.
Default
• VLAN ID 1 - default
• other VLANS - blank string
Format
vlan name <1-4093> <name>
Mode
VLAN Config
no vlan name
This command sets the name of a VLAN to a blank string.
Format
no vlan name <1-4093>
Mode
VLAN Config
vlan participation
This command configures the degree of participation for a specific interface in a VLAN. The ID is
a valid VLAN identification number, and the interface is a valid interface number.
Format
vlan participation {exclude | include | auto} <1-4093>
Mode
Interface Config
Participation options are:
Participation
Definition
Options
include
The interface is always a member of this VLAN. This is equivalent to registration fixed.
exclude
The interface is never a member of this VLAN. This is equivalent to registration
forbidden.
auto
The interface is dynamically registered in this VLAN by GVRP. The interface will not
participate in this VLAN unless a join request is received on this interface. This is
equivalent to registration normal.
Switching Commands
v1.0, November 2010
3-35
Advertisement
Table of Contents
