Show Captive-Portal Status - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Term
Definition
Administrative
The administrative mode is enabled or disabled.
Mode
Operational Status
The Operational status is enabled or disabled.
If the operational status is disabled. This field shows the reason why the operational is
Disable Reason
disabled.
CP IP Address
It is the captive portal server IP address.
Example
(switch)#show captive-portal
Administrative Mode....................... Disabled
Operational Status........................ Disabled
Disable Reason............................ Administrator Disabled
CP IP Address................. 1.2.3.4
show captive-portal status
Use this command to report the status of all captive portal instances in the system.
Format
show captive-portal status
Mode
Privileged EXEC mode
Term
Definition
The additional HTTP port for captive portal to monitor. Captive portal only monitors
Additional HTTP
Port
port 80 by default.
The additional HTTPs port for captive portal to monitor. Captive portal only monitors
Additional HTTP
Secure Port
port 443 by default.
Peer Switch Statistics Reporting Interval
Authentication
The timeout for the authentication page to be served again.
Timeout
The maximum number of captive portal instances supported by switch. It supports up
Supported Captive
Portals
to 10 instances.
The number of created captive portal instances.
Configured Captive
Portals
Captive Portal Commands
v1.0, November 2010
9-4
Advertisement
Table of Contents
