NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 494

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
show telnet !Displays the information about remote connections
! Display information about direct connections
show serial
! End of the script file!
Note: To specify a blank password for a user in the configuration script, you must specify
it as a space within quotes. For example, to change the password for user jane
from a blank password to hello, the script entry is as follows:
users passwd jane
" "
hello
hello
script apply
This command applies the commands in the script to the switch. The <scriptname> parameter
is the name of the script to apply.
Format
script apply <scriptname>
Mode Privileged EXEC
script delete
This command deletes a specified script where the <scriptname> parameter is the name of the
script to delete. The <all> option deletes all the scripts present on the switch.
Format
script delete {<scriptname> | all}
Mode Privileged EXEC
script list
This command lists all scripts present on the switch as well as the remaining available space.
Format
script list
Mode Global Config
Management Commands
v1.0, November 2010
7-78