ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
arp purge
This command causes the specified IP address to be removed from the ARP cache. Only entries of
type dynamic or gateway are affected by this command.
Format
arp purge <ipaddr>
Mode
Privileged EXEC
arp resptime
This command configures the ARP request response timeout.
The value for <seconds> is a valid positive integer, which represents the IP ARP entry response
timeout time in seconds. The range for <seconds> is between 1-10 seconds.
Default
1
Format
arp resptime <1-10>
Mode
Global Config
no arp resptime
This command configures the default ARP request response timeout.
Format
no arp resptime
Mode
Global Config
arp retries
This command configures the ARP count of maximum request for retries.
The value for <retries> is an integer, which represents the maximum number of request for
retries. The range for <retries> is an integer between 0-10 retries.
Default
4
Format
arp retries <0-10>
Mode
Global Config
Routing Commands
v1.0, November 2010
4-4