NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 538

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Format
no idle-timeout
Mode Captive Portal Instance mode
locale
This command is not intended to be a user command. The administrator must use the WEB UI to
create and customize captive portal web content. This command is primarily used by the show
running-config command and process as it provides the ability to save and restore configurations
using a text based format.
Default 1
Format
locale
Mode Captive Portal Instance mode
no locale
This command is intended to delete a locale. The default locale cannot be deleted.
Format
no locale
Mode Captive Portal Instance mode
interface (Captive Portal)
Use this command to associate an interface with a captive portal configuration.
Format
interface <unit/slot/port>
Mode Captive Portal Instance Config mode
no interface
Use this command to remove an association with a captive portal configuration.
Captive Portal Commands
<1-5>
<1-5>
v1.0, November 2010
9-13