NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 509

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Table 8-20: IP Subnet VLANS Log Messages
Component Message
IPsubnet vlans ERROR vlanIpSubnetSubnetValid :Invalid
subnet
IPsubnet vlans IP Subnet Vlans: failed to save configuration This message appears when save
IPsubnet vlans vlanIpSubnetCnfgrInitPhase1Process:
Unable to create r/w lock for vlanIpSubnet
IPsubnet vlans vlanIpSubnetCnfgrInitPhase2Process:
Unable to register for VLAN change callback
IPsubnet vlans vlanIpSubnetCnfgrFiniPhase1Process:
could not delete avl semaphore
IPsubnet vlans vlanIpSubnetDtlVlanCreate: Failed
IPsubnet vlans vlanIpSubnetSubnetDeleteApply: Failed
IPsubnet vlans vlanIpSubnetVlanChangeCallback: Failed to
add an Entry
IPsubnet vlans vlanIpSubnetVlanChangeCallback: Failed to
delete an Entry
Table 8-21: Mac-based VLANs Log Messages
Component Message
Mac based MAC VLANs: Failed to save configuration
VLANS
Mac based vlanMacCnfgrInitPhase1Process: Unable to
VLANS
create r/w lock for vlanMac
Mac based Unable to register for VLAN change callback This appears when this component unable
VLANS
Mac based vlanMacCnfgrFiniPhase1Process: could not
VLANS
delete avl semaphore
Mac based vlanMacAddApply: Failed to add an entry
VLANS
Mac based vlanMacDeleteApply: Unable to delete an
VLANS
Entry
Mac based vlanMacVlanChangeCallback: Failed to add
VLANS
an entry
Log Messages
Cause
This occurs when an invalid pair of subnet
and netmask has come from the CLI
configuration of subnet vlans failed
This appears when a read/write lock
creations fails
This appears when this component unable
to register for vlan change notifications
This appears when a semaphore deletion of
this component fails.
This appears when a dtl call fails to add an
entry into the table
This appears when a dtl fails to delete an
entry from the table
This appears when a dtl fails to add an entry
for a vlan add notify event.
This appears when a dtl fails to delete an
entry for an vlan delete notify event.
Cause
This message appears when save
configuration of Mac vlans failed
This appears when a read/write lock
creations fails
to register for vlan change notifications
This appears when a semaphore deletion of
this component fails.
This appears when a dtl call fails to add an
entry into the table
This appears when a dtl fails to delete an
entry from the table
This appears when a dtl fails to add an entry
for a vlan add notify event.
v1.0, November 2010
8-11