NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 117

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
_____________________
Console Console_Default Console_Default
Telnet Network_Default Network_Default
SSH Network_Default Network_Default
http : Local
https : Local
dot1x :
show dot1x
This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed dot1x
configuration for a specified port and the dot1x statistics for a specified port - depending on the
tokens used.
Format
show dot1x [{summary {<unit/slot/port> | all} | detail <unit/slot/
port> | statistics <unit/slot/port>]
Mode Privileged EXEC
If you do not use the optional parameters <unit/slot/port> or <vlanid>, the command
displays the global dot1x mode, the VLAN Assignment mode, and the Dynamic VLAN Creation
mode.
Term Definition
Administrative Indicates whether authentication control on the switch is enabled or disabled.
Mode
VLAN Indicates whether assignment of an authorized port to a RADIUS assigned VLAN is
Assignment
allowed (enabled) or not (disabled).
Mode
Dynamic VLAN Indicates whether the switch can dynamically create a RADIUS-assigned VLAN if it does
Creation Mode
not currently exist on the switch.
Monitor Mode Indicates whether the Dot1x Monitor mode on the switch is enabled or disabled.
If you use the optional parameter summary {<unit/slot/port> | all}, the dot1x
configuration for the specified port or all ports are displayed.
Term Definition
Interface The interface whose configuration is displayed.
Switching Commands
v1.0, November 2010
3-76