NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 433

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Format
ip ssh
Mode Privileged EXEC
ip ssh protocol
This command is used to set or remove protocol levels (or versions) for SSH. Either SSH1 (1),
SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set.
Default 1 and 2
Format
ip ssh protocol [1] [2]
Mode Privileged EXEC
ip ssh server enable
This command enables the IP secure shell server.
Default disabled
Format
ip ssh server enable
Mode Privileged EXEC
no ip ssh server enable
This command disables the IP secure shell server.
Format
no ip ssh server enable
Mode Privileged EXEC
sshcon maxsessions
This command specifies the maximum number of SSH connection sessions that can be
established. A value of 0 indicates that no ssh connection can be established. The range is 0 to 5.
Default 5
Format
sshcon maxsessions <0-5>
Mode Privileged EXEC
Management Commands
v1.0, November 2010
7-17