NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 458

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
show passwords result
Use this command to display the last password set result information.
Format
show passwords result
Mode Privileged EXEC
Termd
Last User Whose
Password Is Set
Password Strength
Check
Last Password Set
Result
aaa authentication login
This command is used to set authentication at login. The default and optional list names
that you create with the
command. Create a list by entering the
authentication
list-name method
string used to name this list. The
authentication algorithm tries, in the given sequence. The additional methods of
authentication are used only if the previous method returns an error, not if it fails.
An example of a method that returns an error is if a RADIUS server is not present, and an
example of a method failing is when a RADIUS server cannot authenticate the client. If
'local' method is listed first, since local authentication is always available, it only has the
fail condition, not error. As such, if 'local' method is the first in the list, no other method
will be tried.
To ensure that the authentication succeeds even if all methods return an error, specify
as the final method in the command line. For example if
none
authentication method after
Management Commands
Definition
Shows the name of the user with the most recently set password.
Shows whether password strength checking is enabled.
Shows whether the attempt to set a password was successful. If the attempt
failed, the reason for the failure is included.
aaa authentication login
command for a particular protocol, where
method
, no authentication is used if the radius server is down.
radius
v1.0, November 2010
command are used with the
aaa authentication login
argument identifies the list of methods that the
is any character
list-name
is specified as an
none
login
7-42