Dhcp Snooping Configuration Commands - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Term
Definition
Description
The text description of this multicast table entry.
Interfaces
The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
DHCP Snooping Configuration Commands
This section describes commands you use to configure DHCP Snooping.
ip dhcp snooping
Use this command to enable DHCP Snooping globally.
Default
disabled
Format
ip dhcp snooping
Mode
Global Config
no ip dhcp snooping
Use this command to disable DHCP Snooping globally.
Format
no ip dhcp snooping
Mode
Global Config
ip dhcp snooping vlan
Use this command to enable DHCP Snooping on a list of comma-separated VLAN ranges.
Default
disabled
Format
ip dhcp snooping vlan <vlan-list>
Mode
Global Config
Switching Commands
v1.0, November 2010
3-123
Advertisement
Table of Contents
