NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 201

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
show port-security
This command displays the port-security settings. If you do not use a parameter, the command
displays the settings for the entire system. Use the optional parameters to display the settings on a
specific interface or on all interfaces.
Format
show port-security [{<unit/slot/port> | all}]
Mode Privileged EXEC
Term Definition
Admin Mode Port Locking mode for the entire system. This field displays if you do not supply any
parameters.
For each interface, or for the interface you specify, the following information appears:
Term Definition
Admin Mode Port Locking mode for the Interface.
Dynamic Limit Maximum dynamically allocated MAC Addresses.
Static Limit Maximum statically allocated MAC Addresses.
Violation Trap Whether violation traps are enabled.
Mode
show port-security dynamic
This command displays the dynamically locked MAC addresses for the port.
Format
show port-security dynamic <unit/slot/port>
Mode Privileged EXEC
Term Definition
MAC Address MAC Address of dynamically locked MAC.
Switching Commands
v1.0, November 2010
3-160