NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 232

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
dos-control tcpsynfin
This command enables TCP SYN and FIN Denial of Service protection. If the mode is enabled,
Denial of Service prevention is active for this type of attack. If packets ingress having TCP flags
SYN and FIN set, the packets will be dropped if the mode is enabled.
Default disabled
Format
dos-control tcpsynfin
Mode Global Config
no dos-control tcpsynfin
This command sets disables TCP SYN & FIN Denial of Service protection.
Format
no dos-control tcpsynfin
Mode Global Config
dos-control tcpfinurgpsh
This command enables TCP FIN and URG and PSH and SEQ=0 checking Denial of Service
protections. If the mode is enabled, Denial of Service prevention is active for this type of attack. If
packets ingress having TCP FIN, URG, and PSH all set and TCP Sequence Number set to 0, the
packets will be dropped if the mode is enabled.
Default disabled
Format
dos-control tcpfinurgpsh
Mode Global Config
no dos-control tcpfinurgpsh
This command sets disables TCP FIN and URG and PSH and SEQ=0 checking Denial of Service
protections.
Switching Commands
v1.0, November 2010
3-191