Show Logging Hosts; Show Logging Traplogs - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Term Definition
Buffered (In- Shows whether the In-Memory log is enabled or disabled.
Memory)
Logging
Buffered The behavior of the In Memory log when faced with a log full situation.
Logging
Wrapping
Behavior
Buffered Log The count of valid entries in the buffered log.
Count

show logging hosts

This command displays all configured logging hosts. The <unit> is the switch identifier and has
a range of 1-8.
Format
show logging hosts <unit>
Mode Privileged EXEC
Term Definition
Host Index (Used for deleting hosts.)
IP Address / IP address or hostname of the logging host.
Hostname
Severity Level The minimum severity to log to the specified address. The possible values are emergency
(0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7).
Port The server port number, which is the port on the local host from which syslog messages
are sent.
Host Status The state of logging to configured syslog hosts. If the status is disable, no logging occurs.

show logging traplogs

This command displays SNMP trap events and statistics.
Format
show logging traplogs
Mode Privileged EXEC
Utility Commands
v1.0, November 2010
6-22