NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 233
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Format
no dos-control tcpfinurgpsh
Mode
Global Config
dos-control icmpv4
This command enables Maximum ICMPv4 Packet Size Denial of Service protections. If the mode
is enabled, Denial of Service prevention is active for this type of attack. If ICMPv4 Echo Request
(PING) packets ingress having a size greater than the configured value, the packets will be
dropped if the mode is enabled.
Default
disabled <512>
Format
dos-control icmpv4 <0-16384>
Mode
Global Config
no dos-control icmpv4
This command disables Maximum ICMP Packet Size Denial of Service protections.
Format
no dos-control icmpv4
Mode
Global Config
dos-control icmpv6
This command enables Maximum ICMPv6 Packet Size Denial of Service protections. If the mode
is enabled, Denial of Service prevention is active for this type of attack. If ICMPv6 Echo Request
(PING) packets ingress having a size greater than the configured value, the packets will be
dropped if the mode is enabled.
Default
disabled <512>
Format
dos-control icmpv6 <0-16384>
Mode
Global Config
Switching Commands
dos-control icmpv4
v1.0, November 2010
3-192
Advertisement
Table of Contents
