Switching Commands - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

This chapter describes the switching commands available in the managed switch CLI.
The Switching Commands chapter includes the following sections:
• "Port Configuration Commands" on page 3-2
• "show port description" on page 3-9
• "VLAN Commands" on page 3-32
• "Double VLAN Commands" on page 3-47
• "Voice VLAN Commands" on page 3-50
• "Provisioning (IEEE 802.1p) Commands" on page 3-52
• "Protected Ports Commands" on page 3-53
• "Private Group Commands" on page 3-56
• "GVRP Commands" on page 3-61
• "GMRP Commands" on page 3-63
• "Port-Based Network Access Control Commands" on page 3-66
• "Storm-Control Commands" on page 3-82
• "Port-Channel/LAG (802.3ad) Commands" on page 3-94
• "Port Mirroring" on page 3-115
• "Static MAC Filtering" on page 3-118
• "DHCP Snooping Configuration Commands" on page 3-123
• "Dynamic ARP Inspection Commands" on page 3-134
• "IGMP Snooping Configuration Commands" on page 3-142
• "IGMP Snooping Querier Commands" on page 3-151
• "Port Security Commands" on page 3-157
• "LLDP (802.1AB) Commands" on page 3-161

Switching Commands

v1.0, November 2010
Chapter 3
3-1