NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 485

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Format
show radius accounting name [<servername>]
Mode Privileged EXEC
Field
servername
RADIUS Accounting
Mode
If you do not specify any parameters, then only the accounting mode and the RADIUS accounting
server details are displayed.
Term
Host Address
Server Name
Port
Secret Configured
The following shows example CLI display output for the command.
(Switch) #show radius accounting name
Host Address
----------------------- --------------------------------- -------- -----------
192.168.37.200
192.168.37.201
192.168.37.202
192.168.37.203
(Switch) #show radius accounting name Default_RADIUS_Server
Server Name............................ Default_RADIUS_Server
Host Address........................... 192.168.37.200
RADIUS Accounting Mode................. Disable
Port .................................. 1813
Secret Configured ..................... Yes
Management Commands
Description
An alias name to identify the server.
A global parameter to indicate whether the accounting mode for all the servers is
enabled or not.
Definition
The IP address of the host.
The name of the accounting server.
The port used for communication with the accounting server.
Yes or No Boolean value indicating whether this server is configured with a secret.
Server Name
Network1_RADIUS_Server
Network2_RADIUS_Server
Network3_RADIUS_Server
Network4_RADIUS_Server
v1.0, November 2010
Port Secret
Configured
1813 Yes
1813 No
1813 Yes
1813 No
7-69