NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 57

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no spanning-tree forward-time
This command sets the Bridge Forward Delay parameter for the common and internal spanning
tree to the default value.
Format
no spanning-tree forward-time
Mode Global Config
spanning-tree guard
This command selects whether loop guard or root guard is enabled on an interface. If neither is
enabled, then the port operates in accordance with the multiple spanning tree protocol.
Default none
Format
spanning-tree guard { none | root | loop }
Mode Interface Config
no spanning-tree guard
This command disables loop guard or root guard on the interface.
Format
no spanning-tree guard
Mode Interface Config
spanning-tree tcnguard
This command enables the propagation of received topology change notifications and topology
.
changes to other ports.
Default disable
Format
spanning-tree tcnguard
Mode Global Config
Switching Commands
v1.0, November 2010
3-16