NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 142
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Note: This command is only applicable to physical interfaces.
no lacp actor system priority
Use this command to configure the priority value associated with the Actor's SystemID.
Format
no lacp actor system priority
Mode
Interface Config
lacp partner admin key
Use this command to configure the administrative value of the Key for the protocol partner. The
valid range for <key> is 0 to 65535.
Default
0x0
Format
lacp partner admin key
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
no lacp partner admin key
Use this command to configure the administrative value of the Key for the protocol partner.
Format
no lacp partner admin key <key>
Mode
Interface Config
Switching Commands
v1.0, November 2010
3-101
Advertisement
Table of Contents
