Show Lldp; Show Lldp Interface - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

show lldp

Use this command to display a summary of the current LLDP configuration.
Format
show lldp
Mode Privileged Exec
Term Definition
Transmit How frequently the system transmits local data LLDPDUs, in seconds.
Interval
Transmit Hold The multiplier on the transmit interval that sets the TTL in local data LLDPDUs.
Multiplier
Re-initialization The delay before re-initialization, in seconds.
Delay
Notification How frequently the system sends remote data change notifications, in seconds.
Interval

show lldp interface

Use this command to display a summary of the current LLDP configuration for a specific interface
or for all interfaces.
Format
show lldp interface {<unit/slot/port> | all}
Mode Privileged Exec
Term Definition
Interface The interface in a unit/slot/port format.
Link Shows whether the link is up or down.
Transmit Shows whether the interface transmits LLDPDUs.
Receive Shows whether the interface receives LLDPDUs.
Notify Shows whether the interface sends remote data change notifications.
TLVs Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes can
be 0 (Port Description), 1 (System Name), 2 (System Description), or 3 (System
Capability).
Mgmt Shows whether the interface transmits system management address information in the
LLDPDUs.
Switching Commands
v1.0, November 2010
3-166