Captive Portal Client Connection Commands - NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
show captive-portal trapflags
Use this command to display which captive portal traps are enabled.
Format
show captive-portal trapflags
Mode Privileged EXEC mode
Example
(switch)#show captive-portal trapflags
Client Authentication Failure Traps............ Disable
Client Connection Traps........................ Disable
Client Database Full Traps..................... Disable
Client Disconnection Traps..................... Disable

Captive Portal Client Connection Commands

This section describes captive portal client connection commands.
show captive-portal client status
Use this command to display client connection details or a connection summary for connected
captive portal users. macaddr is Client MAC address. If no macaddr is entered, all the client status
will be displayed.
Format
show captive-portal client [ macaddr ] status
Mode Privileged EXEC mode
Term Definition
Client MAC The MAC address of the authenticated user
Address
Client IP Address The IP address of the authenticated user
Protocol The protocol the user is using to access the network.
Verification The verification mode for this client.
Session Time The current session time since the client is authenticated.
Captive Portal Commands
v1.0, November 2010
9-19