NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 153

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
port-channel system priority
Use this command to configure port-channel system priority. The valid range of <priority> is 0-
65535.
Default 0x8000
Format
port-channel system priority <priority>
Mode Global Config
no port-channel system priority
Use this command to configure the default port-channel system priority value.
Format
no port-channel system priority
Mode Global Config
show lacp actor
Use this command to display LACP actor attributes.
Format
show lacp actor {<unit/slot/port>|all}
Mode Global Config
The following output parameters are displayed.
Parameter Description
System Priority The system priority assigned to the Aggregation Port.
Admin Key The administrative value of the Key.
Port Priority The priority value assigned to the Aggregation Port.
Admin State The administrative values of the actor state as transmitted by the Actor in LACPDUs.
Switching Commands
v1.0, November 2010
3-112