NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 63
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
spanning-tree port mode all
This command sets the Administrative Switch Port State for all ports to enabled.
Default
disabled
Format
spanning-tree port mode all
Mode
Global Config
no spanning-tree port mode all
This command sets the Administrative Switch Port State for all ports to disabled.
Format
no spanning-tree port mode all
Mode
Global Config
spanning-tree edgeport all
This command specifies that every port is an Edge Port within the common and internal spanning
tree. This allows all ports to transition to Forwarding State without delay.
Format
spanning-tree edgeport all
Mode
Global Config
no spanning-tree edgeport all
This command disables Edge Port mode for all ports within the common and internal spanning
tree.
Format
no spanning-tree edgeport all
Mode
Global Config
Switching Commands
v1.0, November 2010
3-22
Advertisement
Table of Contents
