NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 231

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
dos-control tcpoffset
This command enables TCP Offset Denial of Service protection. If the mode is enabled, Denial of
Service prevention is active for this type of attack. If packets ingress having TCP Header Offset
equal to one (1), the packets will be dropped if the mode is enabled.
Default disabled
Format
dos-control tcpoffset
Mode Global Config
no dos-control tcpoffset
This command disabled TCP Offset Denial of Service protection.
Format
no dos-control tcpoffset
Mode Global Config
dos-control tcpsyn
This command enables TCP SYN and L4 source = 0-1023 Denial of Service protection. If the
mode is enabled, Denial of Service prevention is active for this type of attack. If packets ingress
having TCP flag SYN set and an L4 source port from 0 to 1023, the packets will be dropped if the
mode is enabled.
Default disabled
Format
dos-control tcpsyn
Mode Global Config
no dos-control tcpsyn
This command sets disables TCP SYN and L4 source = 0-1023 Denial of Service protection.
Format
no dos-control tcpsyn
Mode Global Config
Switching Commands
v1.0, November 2010
3-190