NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 358

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no sntp broadcast client poll-interval
This command resets the poll interval for SNTP broadcast client back to the default value.
Format
no sntp broadcast client poll-interval
Mode Global Config
sntp client mode
This command enables Simple Network Time Protocol (SNTP) client mode and may set the mode
to either broadcast or unicast.
Default disabled
Format
sntp client mode [broadcast | unicast]
Mode Global Config
no sntp client mode
This command disables Simple Network Time Protocol (SNTP) client mode.
Format
no sntp client mode
Mode Global Config
sntp client port
This command sets the SNTP client port id to a value from 1-65535.
Default 123
Format
sntp client port <portid>
Mode Global Config
no sntp client port
This command resets the SNTP client port back to its default value.
Format
no sntp client port
Mode Global Config
Utility Commands
v1.0, November 2010
6-34