NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 206

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
lldp notification-interval
Use this command to configure how frequently the system sends remote data change notifications.
The <interval> parameter is the number of seconds to wait between sending notifications. The
valid interval range is 5-3600 seconds.
Default 5
Format
lldp notification-interval <interval>
Mode Global Config
no lldp notification-interval
Use this command to return the notification interval to the default value.
Format
no lldp notification-interval
Mode Global Config
clear lldp statistics
Use this command to reset all LLDP statistics, including MED-related information.
Format
clear lldp statistics
Mode Privileged Exec
clear lldp remote-data
Use this command to delete all information from the LLDP remote data table, including MED-
related information.
Format
clear lldp remote-data
Mode Global Config
Switching Commands
v1.0, November 2010
3-165