NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 162
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no macfilter addsrc
This command removes a port from the source filter set for the MAC filter with the MAC address
of <macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified as a 6-
byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter must
identify a valid VLAN.
Format
no macfilter addsrc <macaddr> <vlanid>
Mode
Interface Config
macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the MAC address
of <macaddr> and <vlanid>. You must specify the <macaddr> parameter as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter must identify
a valid VLAN.
Format
macfilter addsrc all <macaddr> <vlanid>
Mode
Global Config
no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the MAC
address of <macaddr> and VLAN of <vlanid>. You must specify the <macaddr> parameter
as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
Format
no macfilter addsrc all <macaddr> <vlanid>
Mode
Global Config
Switching Commands
v1.0, November 2010
3-121
Advertisement
Table of Contents
