NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 226

Managed stackable switch cli manual, software version 9.0
Hide thumbs Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
Table of Contents

Advertisement

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
dos-control firstfrag
This command enables Minimum TCP Header Size Denial of Service protection. If the mode is
enabled, Denial of Service prevention is active for this type of attack. If packets ingress having a
TCP Header Size smaller then the configured value, the packets will be dropped if the mode is
enabled.The default is disabled. If you enable dos-control firstfrag, but do not provide a
Minimum TCP Header Size, the system sets that value to 20.
Default
disabled <20>
Format
dos-control firstfrag
Mode
Global Config
no dos-control firstfrag
This command sets Minimum TCP Header Size Denial of Service protection to the default value
of disabled.
Format
no dos-control firstfrag
Mode
Global Config
dos-control tcpfrag
This command enables TCP Fragment Denial of Service protection. If the mode is enabled, Denial
of Service prevention is active for this type of attack. If packets ingress having IP Fragment Offset
equal to one (1), the packets will be dropped if the mode is enabled.
Default
disabled
Format
dos-control tcpfrag
Mode
Global Config
no dos-control tcpfrag
This command disabled TCP Fragment Denial of Service protection.
Format
no dos-control tcpfrag
Mode
Global Config
Switching Commands
[<0-255>]
v1.0, November 2010
3-185

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prosafe xsm7224s

Table of Contents