Captive Portal Local User Commands; User Password - NETGEAR ProSafe GSM7224P User Manual

Term Definition
Interface
The interface associated with the CP ID.
Interface
The description of the interface
Description
Type
The type of the interface
Example
(switch)#show captive-portal interface configuration status
CP ID CP Name
----- ------------
1 Default
(switch)
#show captive-portal interface configuration 1 status
CP ID..................................... 1
CP Name................................... cp1
Interface Interface Description
--------- --------------------------------- --------
1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit

Captive Portal Local User Commands

The following section describes captive portal local user commands.

user password

Use this command to create a local user or change the password for an existing user. The
user-id is user ID in the range of 1-128. The password is the user password in the range of
8-64 characters. You can also enter encrypted password using the parameter encrypted.
Format
user user-id password { password | encrypted enc-password }
Mode
Captive Portal Configuration mode
no user
Use this command to delete a user from the local user database. If the user has an existing
session, it is disconnected.
Format
no user user-id <1-128>
Mode
Captive Portal Configuration mode
ProSafe Managed Switch
Interface Interface Description
--------- ----------------------------
1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit
Captive Portal Commands
Type
Physical
709
Type
--------
Physical