NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 119

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Term Definition
Guest VLAN The time in seconds for which the authenticator waits before authorizing and placing the
Period
port in the Guest VLAN, if no EAPOL packets are detected on that port.
Supplicant The timer used by the authenticator state machine on this port to timeout the supplicant.
Timeout
The value is expressed in seconds and will be in the range of 1 and 65535.
Server Timeout The timer used by the authenticator on this port to timeout the authentication server. The
value is expressed in seconds and will be in the range of 1 and 65535.
Maximum The maximum number of times the authenticator state machine on this port will
Requests
retransmit an EAPOL EAP Request/Identity before timing out the supplicant. The value
will be in the range of 1 and 10.
VLAN Id The VLAN assigned to the port by the radius server. This is only valid when the port
control mode is not Mac-based.
VLAN Assigned The reason the VLAN identified in the VLAN Idfield has been assigned to the port.
Reason
Possible values are RADIUS, Unauthenticated VLAN, Guest VLAN, default, and Not
Assigned. When the VLAN Assigned Reason is 'Not Assigned', it means that the port
has not been assigned to any VLAN by dot1x. This only valid when the port control mode
is not MAC-based.
Reauthenticatio The timer used by the authenticator state machine on this port to determine when
n Period
reauthentication of the supplicant takes place. The value is expressed in seconds and
will be in the range of 1 and 65535.
Reauthenticatio Indicates if reauthentication is enabled on this port. Possible values are 'True" or "False".
n Enabled
Key Indicates if the key is transmitted to the supplicant for the specified port. Possible values
Transmission
are True or False.
Enabled
Control The control direction for the specified port or ports. Possible values are both or in.
Direction
Maximum Users The maximum number of clients that can get authenticated on the port in the MAC-based
dot1x authentication mode. This value is used only when the port control mode is not
MAC-based.
Unauthenticate Indicates the unauthenticated VLAN configured for this port. This value is valid for the
d VLAN ID
port only when the port control mode is not MAC-based.
Session Indicates the time for which the given session is valid. The time period in seconds is
Timeout
returned by the RADIUS server on authentication of the port. This value is valid for the
port only when the port control mode is not MAC-based.
Session This value indicates the action to be taken once the session timeout expires. Possible
Termination
values are Default, Radius-Request. If the value is Default, the session is terminated the
Action
port goes into unauthorized state. If the value is Radius-Request, then a reauthentication
of the client authenticated on the port is performed. This value is valid for the port only
when the port control mode is not MAC-based.
Switching Commands
v1.0, November 2010
3-78