NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 373

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
service dhcp
This command enables the DHCP server.
Default disabled
Format
service dhcp
Mode Global Config
no service dhcp
This command disables the DHCP server.
Format
no service dhcp
Mode Global Config
ip dhcp bootp automatic
This command enables the allocation of the addresses to the bootp client. The addresses are from
the automatic address pool.
Default disabled
Format
ip dhcp bootp automatic
Mode Global Config
no ip dhcp bootp automatic
This command disables the allocation of the addresses to the bootp client. The address are from the
automatic address pool.
Format
no ip dhcp bootp automatic
Mode Global Config
Utility Commands
v1.0, November 2010
6-49