NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 385

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no capture receive packet
This command disables the capturing of receive packets.
Format
no capture receive packet
Mode Global Config
capture all packets
This command enables the capturing of receive packets.
Format
capture all packet
Mode Global Config
no capture all packets
This command disables the capturing of all packets.
Format
no capture all packets
Mode Global Config
capture wrap
This command enables the Buffer Wrapping configuration. Once the capture buffer is full, writes
to the buffer will wrap around to allow continuous packet capture.
Format
capture wrap
Mode Global Config
Default Enabled
show capture packets
This command displays packets being captured from the buffer. The output of the show command
can be redirected to a text file. The resultant text file can be fed to the text2pcap utility or the
Ethereal public domain packet analyzer, which can then be translated to a cap file.
Format
show capture packets
Utility Commands
v1.0, November 2010
6-61