NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 149

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no port lacpmode enable all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
Format
no port lacpmode enable all
Mode Global Config
port lacptimeout (Interface Config)
This command sets the timeout on a physical interface of a particular device type (actor or
partner) to either long or short timeout.
Default long
Format
port lacptimeout {actor | partner} {long | short}
Mode Interface Config
no port lacptimeout
This command sets the timeout back to its default value on a physical interface of a particular
device type (actor or partner).
Format
no port lacptimeout {actor | partner}
Mode Interface Config
port lacptimeout (Global Config)
This command sets the timeout for all interfaces of a particular device type (actor or partner) to
either long or short timeout.
Default long
Format
port lacptimeout {actor | partner} {long | short}
Mode Global Config
Switching Commands
v1.0, November 2010
3-108