NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Manual page 381
Managed stackable switch cli manual, software version 9.0
Hide thumbs
Also See for XSM7224S - ProSafe 10 Gigabit Stackable:
- Hardware installation manual (30 pages) ,
- Installation manual (2 pages) ,
- User manual (740 pages)
Table of Contents
Advertisement
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
no ip host
Use this command to remove the name-to-address mapping.
Format
no ip host <name>
Mode
Global Config
ipv6 host
Use this command to define static host name-to-IPv6 address mapping in the host cache. <name>
is host name. <v6 address> is the IPv6 address of the host.
Default
none
Format
ipv6 host <name> <v6 address>
Mode
Global Config
no ipv6 host
Use this command to remove the static host name-to-IPv6 address mapping in the host cache.
Format
no ipv6 host <name>
Mode
Global Config
ip domain retry
Use this command to specify the number of times to retry sending Domain Name System (DNS)
queries. The parameter <number> indicates the number of times to retry sending a DNS query to
the DNS server. This number ranges from 0 to 100.
Default
2
Format
ip domain retry <number>
Mode
Global Config
Utility Commands
v1.0, November 2010
6-57
Advertisement
Table of Contents
